REACH Bravo

ESSENTIAL ROBOTIC ARMS FOR INSPECTION ROVS

REACH BRAVO

A range of tough, electric, lightweight manipulator arm changing the remote operations landscape for inspection class vehicles.

icon of a dumbbell

Strong

10kg+ Lift

icon of a feather

Lightweight

4.5kg Water

icon of double sided arrow

Compact

80mm Dia

REVOLUTIONARY ROBOTIC ARMS FOR SUBSEA INSPECTION

DESIGNED FOR INDUSTRY LEADING ROVS

The Reach Bravo enables Inspection, Maintenance, and Repair (IMR) tasks usually reserved for more expensive work-class ROVs. Do more with a low logistics footprint and a manipulator that is compact, strong, and tough.

DESIGNED FOR INDUSTRY LEADING ROVs

The Reach Bravo enables Inspection, Maintenance, and Repair (IMR) tasks usually reserved for more expensive work-class ROVs. Do more with a low logistics footprint and a lightweight manipulator that is compact, strong, and tough.

SPECIFICATIONS

With high accuracy (0.1°) joint positioning and intuitive control options, the Reach Bravo system is a must for operators in the new era of close inspection work and complex intervention.

Reach Bravo

Depth Rating: 450MSW

Max Outer Diameter: 90mm

Base Joint Torque: 100Nm+

End-effector Accuracy: <1cm

Grabber Closing Force: 1000N+

Features

All Electric
Quick to integrate
Advanced software interface with 3D visualisation
End-effector interchangeable
Self-protection against collision
Adjustable grab force - pick up a sea urchin or cut a cable

Additional Specifications

Voltage Input

20-48V

Nominal Power

400W

Peak Power

500W

Joint Speed

45°/s (configurable)

Bus Control

RS232/RS485/ Ethernet

SPECIFICATIONS

With high accuracy (0.1°) joint positioning and intuitive control options, the Reach Bravo system is a must for operators in the new era of close inspection work and complex intervention.

Underwater, land, nuclear robotic arm. The Bravo 7

Depth Rating 450MSW

Max Outer Diameter 90mm

Base Joint Torque 100Nm+

Grabber Closing Force 1000N+

End-effector Accuracy <1cm

Features

All Electric
Quick to integrate
Advanced software interface with 3D visualisation
Adjustable grab force - pick up a sea urchin or cut a cable
End-effector interchangeable
Self-protection against collision

Additional Specifications

Joint Speed	60° (configurable)
Voltage Input	20-48V
Nominal Power	200W
Peak Power	300W
Bus Control	RS232/485/Ethernet

BRAVO VARIANTS

Tailored to your Task

Bravo Standard

RB-7001

The Bravo Standard has all the tools and features required to carry out standard dexterous remote operations tasks. Enabled for pairing with the Master Arm controller, it offers ROV operators a first step in progressing their advanced intervention capability.

Interlocking Quad Jaws
Reach Control Standard Software
Master Arm Enabled

Bravo Pro

RB-7201

Multiply your capability with the Bravo Pro. An advanced variant of the Bravo manipulator, upgraded with accessory port capability and an advanced control engine. Featuring additional add-ons and tools in the Bravo range, this variant offers a comprehensive solution for advanced intervention. Inclusions:

Bravo External End-Effector Interface
Interlocking Quad Jaws
Wide Quad Jaws
Parallel Jaws
Softline Cutter
Wrist 1080p IP Camera

Integrated Accessory Port Upgrade
Accessory Port Connector
Cartesian Control Engine
Reach Control Pro Software
Master Arm Enabled

Available for Bravo 7 and Bravo 5 manipulators

See the full list of features included

REACH BRAVO PRODUCTS

Underwater, Land, Nuclear – Reach System robotic arms aren’t just for subsea applications – they’re environment agnostic. With 1-7 Function, these lightweight manipulators are configurable to your needs. See the Datasheets for more information on the Bravo range.

Bravo Rotating Cutter

RB-2130 + RB-1042

Length: 0.33m
Axial Load Rating: 2kN

Bravo 3

RB-3001

Reach: 0.41m
Full Reach Lift: 15kg

Bravo 5

RB-5001

Reach: 0.67m
Full Reach Lift: 12kg

Bravo 7

RB-7001

Reach: 0.9m
Full Reach Lift: 10kg

Bravo Rotating Grabber

RB-2130

Length: 0.33m
Axial Load Rating: 2kN

Bravo Inline Rotate

RB-1100

Joint Torque: 20Nm
Rotate Speed: 45°/s nominal

ACCESSORIES AND UPGRADES

Modular and Configurable

Discover the range of Reach Bravo accessories, designed to heighten the capability and performance of your manipulator, and efficiency of your mission.

Wrist Camera

RB-1057

See clearly with this low light 1080p camera

Accessory Port Connector

RB-1006

Enhance sensor integration with this communications and power interface

Payload Interface

RB-1054

Attach external sensors and tools securely at the manipulator end-effector

Bravo Hub

RB-1080

A multi-port hub to integrate numerous Reach Bravo products

Bravo Mounting Kit

RB-1036

Simple ROV integration for Bravo 2 and Bravo 3 manipulators

Bravo Service Tool Kit

RB-1090

Be prepared with on-the-go servicing in any situation

REACH BRAVO END EFFECTORS

These tooling options enable operators to quickly configure their grabber or robotic manipulator for the required task. A rapid swap-out procedure ensures interchangeability on the go.

Interlocking Quad Jaws

RB-1041

Standard jaws ideal for small
access areas

Wide Quad Jaws

RB-1025

For increased support and
grabbing surface area

Parallel Jaws

RB-1034

Predictable & consistent grip
ideal for valve actuation

Bravo Cutter

RB-1042

Rope cutter for severing
tangled lines & cables

SS Mega Interlocking Jaws

RB-1044

SS 316 Wide Interlocking Quad Jaws for extra reach

SS Interlocking Jaws

RB-1055

SS 316 Interlocking Quad
Jaws for greater durability

SS Mega Curved Jaws

RB-1043

SS 316 curved prongs for
supportive grip & stability

ENHANCE YOUR FALCON ROV

do more with the bravo integration kit

Our proven integration solution for Reach Bravo manipulators allows for simple setup on your Saab Seaeye Falcon vehicle. Expand operational capability of your ROV by adding unparalleled dexterity and performance for UT/CP, CVI, and light intervention work including cleaning and cutting.

Our Falcon Integration Kit is fully verified and easy to use – see the Datasheet below for specifications.

“Working closely with Reach Robotics, who have been solving the challenges of dexterity and manipulation in robotics, has led to the signing of a partnership that ensures we continue to collaborate and develop together, while solving both customer and industry challenges with the right solutions.”

Jason De Silveira
Founding CEO, NEXXIS

CONTROL OPTIONS

Versatile and Advanced

Reach Control

The Reach Control software package provides an intuitive interface between operator and manipulator system. Advanced features including kinematic control and workspace definition enable the conduct of complex tasks in remote hostile environments.

Master Arm

The Master Arm controller enables accuracy and precision when completing complex underwater tasks. With one-to-one joint matching and comfortable design. The Master Arm reduces ROV training time and enables dexterous tasks not possible with traditional methods.

Subscribe to our Newsletter

Follow us

certification

ISO9001:2015 Certified

Australian Border Force

Privacy Policy | Terms and Conditions | Sitemap